Two-wall pipe inventory and storing depends on the land type and available equipment types. Generally the land that used for storage must be flattened, can be artificial and covered by sand, asphalt or grass.

Sewage splitter installation on the pipe process steps are listed below : Use pipe abrasive to make holes on pipe Put splitter inside the hole to make the adaptive piece stand perpendicularly on axis Stabilization [...]

Geomembrane sheet welding by manual extruder process steps are listed below : Geomembrane rolls arrangement at work place, flatten and cut them according to the plan Equipment preparation for welding process such as industrial nozzle [...]

PVC pipes and connections installations are in different ways : Glue connection pipe PVC glue can be hold in 4 to 47 degrees of centigrade . be careful, this glue should not be tightened. Cut [...]

Polyethylene single-wall pipe installation steps are listed below : Route mapping Code the route Creating Access Roads and prepare pipe line route Trench excavation Regular Rice the pipe Pipe and connections installation Screw Type Joint [...]

– Open the connection. Put away the split ring. Put screw and bushing on the pipe. Smooth pipe head completely and cut the pitfalls. – Press the to get to the location. Then press the [...]

Polyethylene Single-wall pipes and connections can be installed in 3 ways : Butt welding Electrofusion welding Use of screw connections

Polyethylene Single-wall pipes and connections are able to connect in the ways listed below : Butt welding in water and wastewater transfer line Electrofusion welding in gas distribution networks Use of screw connections in low [...]