The units are known differently in different countries. For example in Iran No2 Pipe means a pipe with a diameter in 20 millimeters.

نوشته INCH TO MM CONVERTING اولین بار در دستگاه جوش پلی اتیلن بارینکو. پدیدار شد.

To calculate price per branch, gain the unit weight of polyethylene pipes height per meter.

نوشته WEIGHT OF HDPE PIPES اولین بار در دستگاه جوش پلی اتیلن بارینکو. پدیدار شد.

Generally the land that used for storage must be flattened, can be artificial and covered by sand, asphalt or grass.

نوشته STORAGE OF DOUBLE WALL PIPE اولین بار در دستگاه جوش پلی اتیلن بارینکو. پدیدار شد.

• Use pipe abrasive to make holes on pipe
• Put splitter inside the hole to make the adaptive piece stand perpendicularly on axis
• Stabilization unit fixing between pipe hole wall and splitter to be in touch with splitter body part
• Put intermediate piece inside the splitter main body as directed
• Tighten beads first by hand and then by using wrench

نوشته SEWER FITTING اولین بار در دستگاه جوش پلی اتیلن بارینکو. پدیدار شد.

• Geomembrane rolls arrangement at work place, flatten and cut them according to the plan
• Equipment preparation for welding process such as industrial nozzle dryer, mini pine bark with a sanding sheet for extruder welding machine and sheet welding processes
• Use dryer and roller bearings to connect the sheets temporarily
• Polish the sheets using the mini pine bark to remove all surface ripplings for extrusion welding process
• Start the welding process by prepare extruder device. Note that to use appropriate speed, temperature and pressure

نوشته GEOMEMBRANE SHEET WELDING TRAINING اولین بار در دستگاه جوش پلی اتیلن بارینکو. پدیدار شد.

• Glue connection pipe

PVC glue can be hold in 4 to 47 degrees of centigrade . be careful, this glue should not be tightened.

• Cut the tube perpendicular to the cutting axis and make the pipe clearly smooth
• Mark the outer surface of the pipe
• Clean up the pipe from any oil or moisture. Pollution reduces Adhesion
• Cover the pipe outer and inner surface with glue
• Before the adhesive is dried, press the pipe to the pixel and wait for 15 to 30 seconds.
• After the installation is completed clean the extra glue.
• The enough time to tighten the pipe and connection together is 10 to 15 minutes.
• Sealing test for three meter height can be done after 24 hours.

نوشته PVC PIPE INSTALLATION اولین بار در دستگاه جوش پلی اتیلن بارینکو. پدیدار شد.

• Route mapping
• Code the route
• Creating Access Roads and prepare pipe line route
• Trench excavation
• Regular
• Rice the pipe
• Pipe and connections installation
  1. Screw Type Joint
  2. Electrofusion
  3. Extrusion Welding
  4. Socket Fusion
  5. O-ring Type connection
• Pouring dirty soil
• The lines installation
• Watering the lines
• Hydrostatic Testing
• Bugfixing
• Fault finding at the end of lines
• Preservation of water lines
• Spreading the sandy soil
• Water line transfer
• Lines connections

نوشته INSTALLATION SINGLE WALL HDPE PIPE اولین بار در دستگاه جوش پلی اتیلن بارینکو. پدیدار شد.

– Press the to get to the location. Then press the screw and bushing to connect to the main body.

– Bring the bead near the threaded part and tighten with wrench.

– Open the bead and disconnect it from other parts.

– Open the white ring and put it over the pipe and close it to the parts.

– Now the connection is ready to be tightened.

– Tighten the bead with wrench.

نوشته INSTALLATION HDPE PIPE اولین بار در دستگاه جوش پلی اتیلن بارینکو. پدیدار شد.

• Butt welding
• Electrofusion welding
• Use of screw connections

نوشته ELECTROFUSION WELDING TRAINING اولین بار در دستگاه جوش پلی اتیلن بارینکو. پدیدار شد.

• Butt welding in water and wastewater transfer line
• Electrofusion welding in gas distribution networks
• Use of screw connections in low pressure water transfer lines

نوشته BUTT FUSION WELDING TRAINING اولین بار در دستگاه جوش پلی اتیلن بارینکو. پدیدار شد.